That cable is the Motorguide Tour Series Sonar Adapter, part number 8M4001962. This cable is intended for use with a Humminbird fish finder and Motorguide trolling motor with an integrated transducer, but as you will see it works as an adapter cable for a Lowrance transducer as well.
Table of Contents
Can I use a Humminbird helix 7 for ice fishing?
Although Ice Mode is the default operation setting for ICE HELIX fish finders, any HELIX 5, 7, 8, 9 or 10 model with the latest software update has the capability to flip between Ice Mode and Open Water Mode.
How do I change my helix 7 to ice fishing?
How do you use Humminbird ice fishing?
How do I change my Humminbird to ice mode?
The first thing you wanna do when you fire up for the first time is to make sure you are in ICE FISHING MODE. For that just hit Menu two times, on the left side move over to SONAR. Scroll down to the bottom and find where it will either say “ICE FISHING” or “OPEN WATER”.
What ice transducer do I need for Helix 7?
XI 9 1521 CHIRP ice transducer is recommended for GPS-enabled HELIX 5 CHIRP G2, HELIX 7 CHIRP G2 and Helix 7 CHIRP G2N and later models for best performance.
What is the best settings for a helix 7?
- 3 primary views – Flasher, Sonar and Chart views.
- 2D SwitchFire – Max Mode.
- Contrast – Default middle setting (20)
- Gain – Default middle (10) setting.
- CHIRP IR – Off.
- Cone Angle – 15°-21°
- Upper Range – 0 ft.
- Lower Range – Auto, adjust once you know the depth.
What is jigging mode on Humminbird?
Can I use my regular transducer for ice fishing?
Yes. Most modern fish finders can be converted to work for ice fishing. All it takes is a portable power supply and a way to level the transducer in an ice hole.
Can you use side imaging ice fishing?
Sure you can. It is no different than anchoring your boat and watching your graph. You can see fish swim by. Rotate to scan different area.
Can I use Humminbird fish finder for ice fishing?
Ice Fish Finder for Multi-Season Use Humminbird even offers an ICE HELIX 7 CHIRP GPS G4 All-Season model (and 5″ screen) that comes with the sonar GPS combo ice unit and all necessary accessories needed to use the unit on your boat or kayak once the ice melts.
How does a ice fishing transducer work?
Ice fishing is a stationary form of angling where the transducer – the part of the fish finder that beams the signal down and catches it coming up – is hanging down in the hole. Because of this stationary controlled setting, flasher-style depth finders with an analog signal are extremely popular with ice anglers.
How do you fishfinder with ice fishing?
What is the chirp IR on a Humminbird helix 7?
CHIRP IR (Interference Rejection) (CHIRP models only) – If you are fishing near other ICE flashers or transducers, use CHIRP IR to reduce interference or noise on the sonar display. Cone Angle (CHIRP models only) – Select 15º for a narrowly focused down beam.
Can the helix 7 mega Si be used for ice fishing?
If yours is an “Ice” unit, then no, it will not control your Link. Actually, the head unit that comes in the Helix 7 all-season package is a G3N head unit, the same as the one you’d buy for open water. Since it’s networkable, it’s compatible with link.
What transducer works with the Humminbird helix 7?
XNT 9 SI 180 T This transducer was designed for and comes standard with the following models: 398ci SI, 598ci SI, 698ci SI, 797c SI, 798c SI, 798ci SI, 798ci HD SI, 899ci HD SI, HELIX 5 SI GPS, HELIX 5 SI GPS G2, HELIX 7 SI GPS, HELIX 7 SI GPS G2, HELIX 7 SI GPS G2N and HELIX 9 SI GPS models.
Can you use a summer transducer for ice fishing?
Your regular ducer will work fine. You do want it hanging horizontal and just below the bottom of the hole for best results. I use a “summer” fish finder and transducer as my ice fishing sonar. I find it works great.
How do I set up my Humminbird helix 7 ice?
Can you see fish on side imaging?
How do you save battery on Helix 7 ice?
What is switch fire on Humminbird helix 7?
Switchfire is Humminbird’s implementation of “Time Variable Gain”, or TVG. Time variable gain is a software process by which the gain (think, sensitivity) applied to a sonar return changes as a function of that sonar return’s depth.
What is best frequency for fish finder?
Ultrasound frequency used by a fish finder generally ranges from 15 kHz to 200 kHz. However, the majority of the conventional fish finders oriented for recreational craft utilize 50 kHz and 200 kHz.
What frequency is best for sonar?
“For freshwater use, 200 kHz is the most commonly used frequency with traditional 2D sonar,” Scott said. “Without CHIRP, it would produce continuous pulses at 200 kHz.
Does the transducer need to be below the ice?
How far down should I drop my transducer? – Conventional wisdom has it that for the best reading, you should put the bottom of your transducer just below the ice in the center of the hole.
Do I need a fish finder for ice fishing?
Ice Fishing Even more importantly, you will see fish react to your bait and be able to dial in your presentation based on what you are gathering. But fish finders and ice flashers are not needed for ice fishing.