Post Holes- If you plan to secure your posts with cement or by tamping dirt, you will need spacing around the post to do so. For example: A 4×4 post (actual size 3.5″x3. 5″) has a maximum width of just over 5″ (diagonally). Therefore, the 4×4 post will likely fit into a hole drilled by a 6″ diameter auger.
Table of Contents
What is the best ice augers on the market?
- Best Overall: Eskimo HC40 Propane Ice Auger at Amazon.
- Best Budget: StrikeMaster Mora Hand Ice Auger at Amazon.
- Best Gas: Jiffy 4G FourStroke Gas Ice Auger at Sportsmansguide.com.
- Best Electric: StrikeMaster Lithium 40V Electric Ice Auger at Amazon.
- Best Hand Auger:
- Best Drill Powered:
- Best Hand/Drill-Powered:
What is the best size auger for ice fishing?
For gas and electric augers, the best overall size is the 8-inch auger. It’s a large enough hole for most fish, and you can drill overlapping holes for a larger hole. For hand augers, a 6-inch auger would be the best overall size for cutting through the ice if you’re drilling numerous holes.
What is the fastest ice auger?
As far as we can tell, the Trophy Strike 120V Lithium Ion Ice Auger is the fastest ice auger in the world!
What is the lightest ice auger?
The K-Drill is the Lightest and Easiest Ice Auger System Ever Developed and the ONLY Auger System Specifically Designed for Cordless Electric Drills!
Are Eskimo ice augers Made in USA?
With a name like that, you might think Alaska or Canada. Actually, Eskimo Ice Fishing Gear and Ion Electric Ice Augers are made by a company headquartered in Cumberland, Wisconsin, just an hour from Eau Claire.
How do you sharpen ice auger blades?
Is a 6 inch hole good for ice fishing?
Ice fishing holes range in size from 6 to 12 inches in diameter. The ideal hole size is 8 inches. An 8 inch hole is big enough to pull most fish through while also being easy enough to drill with a hand powered ice auger. Again, there are several situations in which one size hole is better than another.
What size auger should I get?
If you plan on only using your auger to plant plugs, for instance, then a 2- or 3-inch auger will fit your needs. If you anticipate the need to bury stakes or set small posts, then you may prefer a 4-inch auger or another, larger size.
How big of a fish can fit through a 6 inch hole?
6 inch hole is 18.85″ in circumference. A 28″ walleye of about 18″ girth is almost a 12 pound fish. A 36″ northern 18″ around is a 13 pound fish. 6 inch hole is fine for all walleye and pike except the trophies.
Where are Jiffy ice augers made?
Jiffy is a proud American-made company. Ben Walker, production team member for 5 years, proudly builds quality and toughness into every Jiffy product so anglers can enjoy their weekends on the lake fishing.
What is an auger used for?
Simply put, an auger is a spiral-shaped tool that is used to drill holes into the ground and other surfaces or materials. The spiraling metal shaft with a blade at the end of the device is known as a “flighting”. The flighting rotates to scrape, cut, or siphon out drilled materials.
Whats better ion or StrikeMaster?
Not only do Ion augers drill faster, they are a tad bit smoother throughout the full cut. From tapping the hole to breakthrough, Ion bores a clean hole. Keep in mind though that StrikeMaster cuts reasonably fast and only looses by a small margin.
How long does an ion ice auger battery last?
From the Ion FAQs page: “The battery is expected to last about 600-800 full charge cycles before performance will be affected.” If you exceeded that in two years, you must live pretty far north!
Is Trophy strike still in business?
We now operate on a limited basis and no longer provide live phone responses. We apologize for the inconvenience. For business reasons, Frictionless World will no longer provide warranty and return authorization for Dirty Hand Tools, RanchEx, Vinsetta and Clam products.
Who makes Eskimo ice auger?
Eskimo® Ice Fishing Gear is one of eleven outdoor brands created and sold by Ardisam, Inc. Our dedicated, full-time customer service team is available year-round,aiming to make your experience with our products the best that it can be throughout the years you own it.
What do you need for ice fishing overnight?
Five-gallon bucket to carry fishing equipment and sit on. Tackle: lures, jigs and bait, extra line, hook sharpener, bobbers, split shot, needle-nose pliers for hook removal and line cutting. Hand warmers and ice cleats. Flashlight and matches or lighter.
How much does a jiffy propane auger weight?
Clean Propane Running, No Gas Smell. The only auger we can start inside the shop. Weight: 8″ weighs 34 lbs., 9″ weighs 35 lbs., 10″ weighs 36 lbs.
How much does it cost to sharpen ice auger blades?
Triple Grind Process $29.95 Your cost is $19.95 per set. Select from the drop-down box below. If you are sending in one Jiffy or Strikemaster chipper-style blade, the cost is $13.95. For the rare, Strikemaster Ultramag 9″, 3-Blade Set, cost is $19.95 The Jiffy STX, three blade set is also $22.95.
Can Jiffy ice auger blades be sharpened?
Jiffy actually makes a blade sharpener. And this is one that you can just put on a hard surface. They actually make little grippers on the back, but this is what looks like. And really all you do is put it on a hard surface, push down on it, take your blade and run it through this blade sharpener.
Can you sharpen auger blades with knife sharpener?
A variety of tools and methods can be employed to sharpen ice auger blades. A blade that has been badly damaged or rusted might first need some attention with a wood or metal file. You can use a whetstone or knife sharpener for precise honing.
How deep are ice fishing holes?
The hard part is finding them. Many hardwater anglers spend far too much time fishing over deep structure-underwater points and reefs in the middle of the lake in 80 to 100 feet of water. Instead, it’s much wiser to drill holes over and around structure in moderately deep water of 20 to 40 feet.
How do you keep ice holes from freezing?
- Ice Skimmer.
- Thermal Hole Cover.
- Ice Defense Pro.
- Ice Shelters.
- Ripple Puck.
- Coal Can Magic.
- Tip-up Hot Box.
- Boil Water.
How do you drill holes in ice fishing?
How do you measure an ice auger?
What is this? You can always use a tape measure to double-check the markings left on your auger. You’ll do this by hooking the metal edge of the tape measure to the bottom of your hole. If the marking reads four inches (10.16 centimeters) or more then you should be safe to begin fishing.