Ten-inch is the most common size and will tackle every situation or species you may target. A 4 1/2 inch hand auger is perfect for chasing panfish during early ice. For manual augers, it can become a bit more complicated.
What is the best size auger for ice fishing?
For gas and electric augers, the best overall size is the 8-inch auger. It’s a large enough hole for most fish, and you can drill overlapping holes for a larger hole. For hand augers, a 6-inch auger would be the best overall size for cutting through the ice if you’re drilling numerous holes.
What is the most popular ice auger?
- Best Overall: Eskimo HC40 Propane Ice Auger at Amazon.
- Best Budget: StrikeMaster Mora Hand Ice Auger at Amazon.
- Best Gas: Jiffy 4G FourStroke Gas Ice Auger at Sportsmansguide.com.
- Best Electric: StrikeMaster Lithium 40V Electric Ice Auger at Amazon.
- Best Hand Auger:
- Best Drill Powered:
- Best Hand/Drill-Powered:
What can I use instead of an ice auger?
- Axe.
- Spud bar.
- Digging iron.
- Pick axe.
- Chainsaw.
- Ice saw.
Is an 8 inch ice auger big enough?
Ice fishing holes range in size from 6 to 12 inches in diameter. The ideal hole size is 8 inches. An 8 inch hole is big enough to pull most fish through while also being easy enough to drill with a hand powered ice auger.
How deep are ice fishing holes?
The hard part is finding them. Many hardwater anglers spend far too much time fishing over deep structure-underwater points and reefs in the middle of the lake in 80 to 100 feet of water. Instead, it’s much wiser to drill holes over and around structure in moderately deep water of 20 to 40 feet.
How big of a fish can fit through a 6 inch hole?
6 inch hole is 18.85″ in circumference. A 28″ walleye of about 18″ girth is almost a 12 pound fish. A 36″ northern 18″ around is a 13 pound fish. 6 inch hole is fine for all walleye and pike except the trophies.
How do you sharpen ice auger blades?
What is the fastest ice auger?
As far as we can tell, the Trophy Strike 120V Lithium Ion Ice Auger is the fastest ice auger in the world!
What is the lightest ice auger?
The K-Drill is the Lightest and Easiest Ice Auger System Ever Developed and the ONLY Auger System Specifically Designed for Cordless Electric Drills!
Can I use my chainsaw to cut ice?
Yes, you can cut ice with your chainsaw. You don’t have to apply any mineral oil to prevent the water from pollution. To prevent the blade from rusting, you will have to look after your chainsaw.
Can you use a drill for an ice auger?
Unless you’re using a heavy-duty drill or are unsure of your grip, you’re fine with just using the drill for 6-inch augers. I simply get a good grip on the drill and hold the back of the drill tight with my free hand. But a stabilizing handle isn’t a bad idea for 8-inch models because of increased torque.
How do you cut a hole in a thick ice?
What month is best for ice fishing?
March is the best month of the winter for ice-fishing in most of the Ice Belt, but anglers are never sure how the ice conditions will impact access to the lakes.
Is it better to ice fish in shallow or deep water?
For the most part, where you find the fish in the spring and fall will be the same place you’ll find them in the winter. In my experience, I’ve found that most of the best ice-fishing action comes in water from 3-to-20 feet deep.
What time of day is good for ice fishing?
The best time of day to ice fish is during the first couple of hours after sunrise, and for about 2 hours both before and after sunset. These are the times when most fish are heading to their feeding grounds, and when most species are active.
How much does it cost to sharpen ice auger blades?
Triple Grind Process $29.95 Your cost is $19.95 per set. Select from the drop-down box below. If you are sending in one Jiffy or Strikemaster chipper-style blade, the cost is $13.95. For the rare, Strikemaster Ultramag 9″, 3-Blade Set, cost is $19.95 The Jiffy STX, three blade set is also $22.95.
Can you sharpen auger blades with knife sharpener?
A variety of tools and methods can be employed to sharpen ice auger blades. A blade that has been badly damaged or rusted might first need some attention with a wood or metal file. You can use a whetstone or knife sharpener for precise honing.
Can Jiffy ice auger blades be sharpened?
Jiffy actually makes a blade sharpener. And this is one that you can just put on a hard surface. They actually make little grippers on the back, but this is what looks like. And really all you do is put it on a hard surface, push down on it, take your blade and run it through this blade sharpener.
Does Eskimo own ion?
Eskimo and Ion are two of 10 brands created by a half-century old company called Ardisam Inc. which is known for reliable fishing shelters, augers, and other outdoor products.
How much does a jiffy propane auger weight?
Clean Propane Running, No Gas Smell. The only auger we can start inside the shop. Weight: 8″ weighs 34 lbs., 9″ weighs 35 lbs., 10″ weighs 36 lbs.
What’s the best propane ice auger?
- Eskimo Propane Auger Series.
- Eskimo Propane Rocket Ice Auger.
- Jiffy Pro4 X-Treme Ice Drill.
Whats better ion or StrikeMaster?
Not only do Ion augers drill faster, they are a tad bit smoother throughout the full cut. From tapping the hole to breakthrough, Ion bores a clean hole. Keep in mind though that StrikeMaster cuts reasonably fast and only looses by a small margin.
How long does an ion ice auger battery last?
From the Ion FAQs page: “The battery is expected to last about 600-800 full charge cycles before performance will be affected.” If you exceeded that in two years, you must live pretty far north!